Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

压电周期板中耦合禁带影响规律分析

近年来，利用周期结构中弹性波禁带特性减振的研究思路受到了广泛关注。针对以往周期结构难以实现宽频且可调禁带的问题，设计了一种含电路网络的压电周期结构。该结构中的弯曲波和电路网络中的电波通过压电效应可以产生一个较宽的耦合禁带，且通过调整电路参数就可以达到调节禁带位置的目的。首先，为了高效计算该结构的波动特性，开发了适用于压电周期结构的减缩波有限元算法，该算法可以在保证结果准确性的基础上节约90%以上的计算时间。利用该算法研究了压电材料尺寸和形状对耦合禁带性能的影响。结果表明:相同电学参数下，随着压电片尺寸的增大，耦合禁带向低频移动，且禁带带宽增加；相同面积下含圆形和方形压电片的机电系统内耦合禁带差异较小，即形状对耦合禁带的分布影响不大。其次，针对不同尺寸和形状的机电系统，设计了电学参数使得在同一频率附近产生耦合禁带，并分析了其性能差异。最后，为了证明耦合禁带的减振效果，设计了一种有限压电周期板模型，其强迫响应的结果证明了耦合禁带对结构内弹性波可以进行有效调控。      

基于AFI混合聚类算法的轴承故障诊断方法

针对滚动轴承振动信号标记数据量小、故障模式多样的现状，提出了一种基于AFI混合聚类算法的半监督式轴承振动信号故障诊断方法。利用小波包分解方法提取了信号的能量特征谱，并通过主成分分析方法增强了信号的特征；参考迭代自组织数据分析的“分裂”和“合并”的思想，为人工鱼群算法中的个体鱼增加了“分裂进化”和“合并进化”行为；采用模糊C均值方法定义了隶属度矩阵和目标函数，并利用改进的人工鱼群算法，迭代搜寻了目标函数的全局最优解，得到了各故障模式的聚类中心；通过计算测试数据的最近邻聚类中心，实现了故障模式识别。结果表明，该方法无需指定聚类簇数，能在标记数据量小的情况下完成训练，较同类方法表现出了更优的故障模式识别性能。     

速率模式飞轮姿态控制系统飞轮组合平稳切换方法

对速率模式飞轮姿态控制系统的能控性、稳定性和飞轮组合切换过程进行了研究，揭示了在飞轮组合切换过程中引起卫星姿态抖动的原因，提出了通过对残余角动量进行卸载并将卸载函数同时前馈到系统输入的方法，以保持卫星姿态的稳定度。从理论上证明了可引入残余角动量进行卸载，将卸载函数同时前馈到系统输入，并且不改变原系统的能控性和稳定性。给出了某卫星飞轮切换应用实例，说明了飞轮组合平稳切换方法的有效性。     

一种基于OPTICS聚类的仅测角导航目标检测算法

仅测角自主导航方法具有设备简单、复杂度低，功耗低的优点，在空间任务中具有广泛的应用前景.针对中远距离下空间目标特征少的特点，提出了一种利用基于OPTICS聚类算法的空间目标检测方法，可用于仅测角导航过程中的目标检测.对原始星图进行预处理提取星点及目标点，并结合星图识别的结果选择部分帧，使用经过改进的OPTICS聚类方法获得目标运动轨迹.最后，使用本文中的算法对软件仿真出的含有目标的高精度星图进行处理验证了算法的可行性.在卫星相对于空间目标抵近过程中，目标检测的水平误差及垂直误差小于0.15°的帧数分别占到了85.4%以及99.6%.相比AVANTI实验中的目标检测方法，减少了在轨任务中相关参数的调节，进一步提升了算法的自主性.     

气室无磁加热结构研究进展与展望

碱金属气室是原子陀螺、原子磁强计和原子钟等原子测量仪器的核心部件.原子密度主要受加热温度的影响,高均匀性、高稳定性的气室加热结构是保证碱金属原子密度稳定的关键技术,对提升原子测量仪器输出信号的灵敏度至关重要.回顾了目前常用的碱金属气室加热方法,针对加热层、传热层、保温层等组件,梳理和总结了碱金属气室加热结构的发展方向和发展历程,并在此基础上展望了未来碱金属气室加热结构的发展趋势.     

基于飞行数据分析的发动机故障诊断系统研究

依据现有的发动机故障诊断方法,研究发动机故障诊断系统,通过对飞行数据中反映发动机性能指标的关键参数数据进行分析,说明系统对航空发动机故障诊断的可行性和必要性,研究结果对于提高发动机维护的快速性和准确性具有重要意义.     

Study of ionospheric D region changes during solar flares using MF radar measurements

During solar flares, the X-ray radiation suddenly increases, resulting in an increase in the electron density of the atmospheric D region and a strong absorption of short-wave radio waves. Based on Langfang medium frequency (MF) radar, this paper analyzed the variation characteristics of D region in the lower ionosphere from 62 km to 82 km. The analysis focused on multiple C-level and M-level solar flare events before and after the large-scale flare event at 11:53 (UT) on September 6, 2017. The results show that it is difficult to detect the electron density over 70 km in Langfang during solar flares, but the electron density value can be obtained as low as 62 km, and the stronger the flare intensity, the lower the detectable electron density height. Besides, the equal electron density height, the received power of X and O waves will also be significantly reduced during the flares, and the reduction of equal electron density height has a weak linear relationship with flare intensity.     

低温锂离子电池研究进展

随着能源需求的日益高涨，锂离子电池（LIB）在各个领域内的应用愈发广泛。为满足极端气候等特殊应用环境对储能器件的需求，LIB需拓宽其工作温度范围。从材料和电池结构角度详细总结了应用于低温条件LIB的最新研究进展。首先，分析了限制LIB低温性能的根本原因；然后，分别从电解液的研发与优化、电极材料的改性和开发、新型电池体系的开发、电池热管理系统（BTMS）设计4个方面归纳并讨论了在低温情况下改善LIB性能的途径和方法；最后，总结了低温LIB研究亟待解决的问题，并为新一代低温LIB的发展提出了可行的研究方向。      

纤维织物超高速碰撞热-力学模型与分析

A new thermo mechanical model for fiber fabric of hypervelocity impact is established by using the Johnson Cook model, the Gruneisen equation of state and the FEM SPH coupling algorithm, while some new factors are taken into account such as the heat generation, strain rate strengthening and high temperature softening of materials. Mechanical and thermal information could be obtained with the model, such as penetration, fragmentation, stress and strain, heat generation and temperature field of fiber fabric. The analysis results are in good agreement with the experimental results.